![SeedSigner Case](/content/images/size/w1140/2022/11/assembly-ISO-1.jpg)
SeedSigner Case
The first seedsigner case I designed used captured buttons to increase the button size - this was well received but seemingly proved too fiddly / experimental to gain widespread adoption.
The aim with this new case is to be easy to print, have a high level of finish on the visible surfaces. There will be versions for the Pi Zero, 2, 3 and 4, or if possible a single version compatible across all boards.
Temp Images
![](https://orange.surf/content/images/2023/01/sequence-base.jpg)
![](https://orange.surf/content/images/2023/01/sequence-camera.jpg)
![](https://orange.surf/content/images/2023/01/sequence-pi.jpg)
![](https://orange.surf/content/images/2023/01/sequence-lcd-1.jpg)
![](https://orange.surf/content/images/2023/01/sequence-mid.jpg)
![](https://orange.surf/content/images/2023/01/sequence-top.jpg)
![](https://orange.surf/content/images/2023/01/sequence-top-special.jpg)
Earlier Versions
![](https://orange.surf/content/images/2022/11/assembly-ISO.jpg)
![](https://orange.surf/content/images/2022/11/top-top.jpg)
![](https://orange.surf/content/images/2022/11/mid-top.jpg)
![](https://orange.surf/content/images/2022/11/assembly-top-1.jpg)
Zero
![](https://orange.surf/content/images/2023/04/os_sscase_zero.png)